Product Overview
With easily interchangeable drums, the Speedrooter XL gives you long distance clog-busting power in 3″ to 10″ lines – up to 200 feet. The rugged, easy-to-maneuver Speedrooter XL sports a powerful 3/4 hp motor to drive the cable down long runs and clear tough stoppages.
Change drums to add cable lengths or swap cable sizes with ease. Just loosen three knobs and remove the drum. Switch between 3/4″ or 5/8″ Flexicore cables in the large drum design – General’s see through inner cage lets you quickly gauge how much cable remains – or substitute the small drum with 100 feet of 1/2″ Flexicore cable for smaller lines.
Variable speed cable feed offers raw driving and pulling power for long, tough jobs – feeding and retrieving 3/4″, 5/8″, and 1/2″ cables. To adjust for each cable size, simply turn a knob on top of the feed – no screwdriver required!
One person can easily load Speedrooter XL onto a truck. The machine’s frame slides smoothly from the loading wheel to the handle to stair climbers and finally to the wheels. The adjustable height, swept back handle also provides maximum maneuvering leverage. And the durable design features a braced frame at key stress points, front and rear drum supports for longer bearing wear, and Flexicore® cable.
FEATURES
- Clears 3″ through 10″ drains up to 200 ft. down the line.
- Large drum holds 100 ft. of 3/4″ or 5/8″ Flexicore cable.
- Small drum holds 100 ft. of 1/2″ Flexicore cable.
- Inner drum cage protects against cable tangling.
- Variable speed Power Cable Feed drives and retrieves cable at up to 20 ft. per minute.
- Features stair climbers, 10″ ball bearing tires, truck loading wheel and tool box.
- Power 3/4 hp motor provides clog-busting power.
- Adjustable height handle can be 3″ taller or more compact.
- Flexicore wire rope center cables have unequalled strength yet the right amount of flexibility.
- Made in U.S.A.
Guide Tube
Greatly increases the efficiency of power cable feed by reducing cable whipping and drag. Keeps your hands off of the spinning cable. Tube is 30″ long. Five foot extensions are made of rigid conduit with a flexible spring end.
Portability, Convenience, and Safety
Equipped with 10″ heavy-duty wheels, stair climbers, tool box, and ground fault circuit interrupter.
Truck Loading
One person easily loads the Speedrooter XL onto a truck. The swept-back handle and loading wheel give you the needed leverage.
V-belt Stair Climbers
V-belt stair climbers like the ones used to move heavy furniture and appliances let you take the Speedrooter XL up a flight of stairs yourself.
Flexicore®Cable
Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequalled strength and the right amount of flexibility. It’s so tough, it has a one year warranty against defect or breakage.
Flexicore®Patent Nos.
2,244,735 and 2,849,870
OPTIONS
Small Drum
With easily interchangeable drums, the Speedrooter XL clears tough clogs in 3″ to 10″ lines – up to 200 feet. A large drum holds 100 feet of 3/4″ or 1/2″ Flexicore cable. For smaller lines, you can switch to a small drum (optional) that holds 100 feet of 1/2″ Flexicore cable.
SPECIFICATIONS
Weight:
115 lbs. (52 kg) without cable
Dimensions:
26″ deep, 22″ wide, 41″ high (66 cm x 56 cm 104 cm)
Drums:
Large drum holds 100 ft x 3/4″ or 5/8″ cable (30 m x 19 mm or 17 mm).
Optional small drum holds 100 ft. x 1/2″ cable (30 m x 12.7 mm)
Drum Removal:
Loosen three knobs and lift drum off.
Motor:
3/4 hp with capacitor, forward-off-reverse switch, 20 ft. power cord and ground fault circuit interrupter.
Foot Switch:
Pneumatic, with no electrical contact between pedal and motor.
Power Cable Feed:
Drives and retracts at variable speed of up to 20 ft. per minute.
Wheels:
10″ semi-pneumatic heavy duty with ball bearings.
Stair Climbers:
Heavy-duty V-belts running on nylon rollers.
Wheel Brake:
Keeps machine in place on the job or in the truck.
Truck Loading Wheel:
Enables one person to lift machine onto bed of truck.
Tool Box:
Attached to rear of machine. Holds all cutters except Flexible leader.
Leather Gloves:
With double-reinforced palm for hand protection when guiding cable.
Cables:
Left wound Flexicore® wire rope center 3/4″ diameter for 4″ to 10″ lines and 3″ lines without sharp bends; 5/8″ diameter for 3″ to 6″ lines; 1/2″ diameter for 2″ to 3″ lines.
Cutters:
Cutter Set for 5/8″ and 3/4″ cables
3SCB, 4SCB 3″ and 4″ Side Cutters
3HDB 3″ Heavy Duty Saw Blade
SHD Spear Head
2UC 2″ U-Cutter
4RSB 4″ Rotary Saw Blade
RTR-2 Large Retrieving Tool
LE-3 Flexible Leader, 26″ long
Additional Cutter Set for 1/2″ cables
AH Arrow Head
2SCB 2″ Side Cutter Blade
1-1/2UC 1-1/2 U-Cutter
RTR-1 Small Retrieving Tool
LE-1 Flexible Leader, 13″ long
